|
| |
|
|
KEY BENEFITS
The µPREMIUM offers a
combination of modern design with high specs and versatility. The µPREMIUM
reader is available in 3 versions :
-
µPREMIUM-EM
: a 125 kHz reader, supporting transponder types EM4x02, Hitag 2 in Public
Mode A, TEMIC e5550 and equivalent devices.
-
µPREMIUM-MF
: a 13,56 MHZ Mifare UID reader supporting Mifare, Mifare Ultralight and
Mifare Desfire
-
µPREMIUM-MFS
: a 13,56 MHz Mifare Sector reader allowing full access to all sectors on
the Mifare transponder.
The
user can freely select between 13 interfaces, which can be set by an integrated
DIP-switch, or for the Mifare Sector reader, the reader interface can be freely
set by the Master Card.
Due
to the fully potted housing, the reader can be installed both indoors and
outdoors.
A
three-colour LED indication and audible tone enhance user feedback. Both beeper
and LED’s can be controlled by the host system.
Refer to separate web page for further details on
µPremium-MFS sector reader ( click button on left side ).
|
|
|
|
SPECIFICATIONS
- Dimensions: 89 x 45 x
16 mm, optional spacer plate 89 x 45 x 7 mm ( supplied with each
reader )
- Supported
transponder types
- on
125 kHz : 40 bit read only transponders (EM4x02 family, HiTag2 Public
Mode A,TEMIC e5550 and equivalent)
- on
13,56 MHz : mifare® Std, mifare® Ultralight, mifare® DESFire (Contactless
interface as per spec ISO/IEC 14443 Type A)
- Interface:
DIP-switch selectable ( or selectable with Master Card for PREMIUM-MFS
)
- Wiegand (42 bits, 34
bits or 26 bits)
- Clock
& Data (13, 10, 9 or 8 characters)
- RS232
(9600, 4800 or 2400 Bd)
- TTL (9600, 4800 or 2400
Bd)
- RS485 (requires special
version of the reader - only available for PREMIUM-EM)
- customer
specific interfaces available on request
- Read range with
internal antenna ( values depending on transponder types, power supply
and ambient environment )
- on
125 kHz up to 175 mm
- on
13,56 MHz up to 60 mm
-
Power
supply : 5 Vdc to 13,8 Vdc / 100 mA typ.
-
Indications : 3 LED's (
red / yellow / green ) + buzzer
-
Wiring : 10-wire cable
( approx. 1 m long )
-
Protection rate : IP65
( depending on mounting method )
-
Operating temperature :
-20 °C to + 60 °C
-
Integrated antenna and
electronics
-
Fully potted housing
allows easy installation both in- as outdoor
|
![[Company Logo Image]](../../images/logo_mid.gif){kind=logo}
