KEY BENEFITS

The µMFPROG Mifare Card Programmer will load values into any sector of a Mifare card.  It will also program standard Mifare cards for use with the µPREMIUM-MFS family of Mifare readers.  The card programmer comes complete with RS-232 serial cable and Windows compatible PC software, and requires a 12Vdc power supply.

SPECIFICATIONS

• Dimensions: 154 mm x 84 mm x 38 mm  

• Supported transponder types: Mifare® Std 1K and 4K (Contactless interface as per spec ISO/IEC 14443 Type A)  

• RF Frequency : 13.56 MHz

• Interface: RS-232 port operates at 19200 baud for connection to PC

• Read range with internal antenna : 20 to 50 mm ( values depending on transponder types and ambient environment )

• Power supply : 12 Vdc / 120 mA typ.

• Software runs on Windows 95/98/NT/2000/XP

Software features Secure Card Programming Software

• Software runs on Windows 95/98/NT/2000/XP
• Programs any sector on a Mifare card with any data. Supports VALUE format
• Programs keys and access bits into the trailer block of any sector on the card
• Format Sector 0 and/or Sector 16 of the card into a Mifare Application Directory (MAD) according to MAD1 and MAD2 specifications
• View/Edit/Add applications in the MAD directory of the card
• Creates secure configuration cards for the µPREMIUM-MFS family of Mifare readers. Configuration cards set the following on the µPREMIUM-MFS reader:
  • Sector/block on card to read.  This may be defined by an AID (application ID) if the card is using the Mifare Application Directory (MAD)
  • Key to use for reading that sector
  • Number of bytes to read from the card
  • Format of output from µPREMIUM-MFS (Wiegand, Magstripe, RS232, custom formats)
  • Behaviour of LEDs and beeper on good and failed reads
• Converts a decimal ID number into appropriate wiegand or magstripe bits for programming into a sector for a secure ID card application
• Saving and loading of user configurations to disk and logging of cards programmed to a text file