|





| |
Micron
ID offers an extensive range of card readers.
As
specialists in the RFID field, we can supply you the best solution in both the
125 kHz and 13,56 MHz domain.
- µPREMIUM
-
|

|
Proximity
card reader with multiple built-in data interfaces all-in-one
:
- Wiegand ( 26, 34 and 42 bits )
- Clock & Data ( 8 , 10and 13 characters )
- RS232 ( 2400, 4800 and 9600 Bd )
- TTL ( 2400, 4800 and 9600 Bd )
Up
to 17,5 cm read range.
Available
for EM, Mifare and Mifare sector
technologies.
|
|
-
- µPASS
-
|

|
Proximity
low-budget card reader for Mifare S50 and Mifare Lite
transponders.
Up
to 5 cm read range.
Available
for Mifare and Mifare sector
technologies.
|
-
- µCLASSIC
-
|

|
µCLASSIC
low-budget card reader for EM, MIFARE or ISO15693 technology.
.
Available
for EM, Mifare, ISO15693 ( TI TagIt HF1 and
Philips I-Code2 ) technologies.
Available
in white housing.
Fits
over European flush mount frame ( UP55 ).
|
|
-
- µNOVA
-
|

|
µNOVA
is especially designed for a perfect fit in standard 55 mm
switchboxes. It contains all the
electronics required to read an RFID transponder and outputs
the code in a number of formats.
Available
for EM, HITAG, MIFARE and LEGIC
technologies and with a wide variety of interfaces such as
Wiegand, Clock&Data, TTL, RS232 or RS485.
Complete
with integrated antenna, tricoloured LED and buzzer.
|
|
-
- µULTRA
-
|

|
µULTRA
reader is a fully potted unit containing
all the electronics required to read an RFID transponder and
outputs the code in a number of formats.
Available
for EM and Mifare technologies.
The
reader allows simple installation into a 55mm switchbox.
|
|
-
- µDESK
-
|

|
µDESK
is a low cost high performance smart card reader writer, and
applies Mifare and ISO15693 ( TI TagIt HF1 and Philips I-Code2 ) contactless
smart card technology.
It features reliable read write at
voltages as low as 5 volts making it ideally suited to a wide
variety of applications, particularly access control, time
clock and POS system. It provides KEY A and KEY B read / write
control. |
|
|