KEY BENEFITS
The
µULTRA reader is designed for simple installation into a 55mm switchbox. This
reader comes in a fully potted units containing all the electronics
required to read an RFID transponder and output the code in a number of
formats. Due to the
fully potted housing, the reader can be installed both indoors and
outdoors.
An
8-way connector on the back of the unit is provided to connect the unit to
a controller.
A
three-colour LED indication and audible tone enhance user feedback. The
unit also allows for user control of two of the three LEDs and the beeper.
A
number of possible output formats is available and can be selected at time
of ordering.
The µULTRA reader is
available in 2 versions :
-
µULTRA-EM
: a 125 kHz reader, supporting transponder types EM4x02, Hitag 2 in
Public Mode A, TEMIC e5550 and equivalent devices.
-
µULTRA-MF
: a 13,56 MHZ Mifare UID reader
|